AE86 in Turbo Trouble

Corolla Carnage

2011-01-03T13:52:00.000-08:00

So I got the control arm on a few days ago but found that something else on the car is bent. Either the frame or the tension rod bracket is bent. I learned after not being able to bolt the tension rod to the control arm. so the next thing to do would be to see what else is bent then move on from there.

First update in a loooong time...

2010-11-28T03:55:00.001-08:00

Well I was going to try and keep this updated better than I have. now that I am able to actually do something to my car I might be able to do that. in the last few months I have been collecting parts to finish up the turbo stuff on my 16V. at this point I on'y need a Cometic head gasket and some ARP head studs both of which will probably be bought in January then the motor with be ready to boost.

Her is a more updated parts list of whats on the car and what is going on the car.

New driver door hinges- from Toyota
New taillight seals
Sprinter JDM taillights-
GReddy Type-S coil overs-
T3 4-link
Battle version panhard bar
Walbro 255 lph fuel pump
Manual steering rack from SR5 AE86
8 spare tires
Celica Supra Wheels
T28 Turbo no name brand
Long style turbo manifold no name brand
7mgte injectors
injector plugs from 3 or 4 different Subaru engines at the junkyard
Starion FMIC
2 10" Phoenix Golf Subs and a 1000w volfehag amp
Vibrant performance down pipe flange
Vibrant performance down pipe adapter
drivers side control arm (oops)
Weir Performance ring and pinion
Weird Performance solid pinion spacer
and their might be more I can't remember right now

I think the biggest update is that the car is currently parked right now and has been since september. Their are two reasons for this. One being that I was planning on Parking it for the winter so I could save money and its really not fun to drive when its cold. and the other reason being that I crashed it and bent the control arm on the drivers side.

Well thats all I have for right now but I will be trying to update this more often.

VIP Performance

2010-02-17T13:08:00.000-08:00

I have an appointment for my coil over install tomorrow at 2pm at VIP Performance!

Cleaned!

2010-02-17T12:50:00.000-08:00

This is where the Corolla sat sense mid November

So I spent about an hour today after I brought the car home cleaning the interior then went and did a little basic wash at the self wash place down the road. After that I got the tires filled cause they looked a little low after sitting for a few months. Here are some before and after pics. The before pics were actually taken after I got the top layer of mold off before I drove it home haha.

That last picture is of the front passenger seat and all those little black sport won't come out. DAMNIT!

Cleansing Journey

2010-02-17T00:25:00.000-08:00

I am going to pick up the to be turquoise turtle tomorrow from the spot I stored it at for the winter. I am bringing it home to clean the inside so when I take it to VIP Performance it won't be all moldy. I'm sure they will appreciate that. I will try to get some pics of the interior prior to washing it so you can tell the difference between a car that doesn't seal good and sits and a car that doesn't seal good and is a driver haha.

Collection of Parts

2010-02-12T16:33:00.000-08:00

So, I have posted this in a few spots already but I figured I might as well post it here as well sense this is going to be my main build log.

These aren't in any specific order just how I remember them and they are also parts that I have that AREN'T on the car yet but will be and are in my possession, I have more parts on the way but don't actually have them in my possession yet. I'll try and post a price if I can remember what it is.

New driver door hinges-$120 from Toyota

New taillight seals

Sprinter JDM taillights

SPTec distributor relocation kit and spark plug wires-$650 shipped from rhdjapan.com

(2) Advan sa3r 16" wheels

GReddy Type-S coil overs-$1400

TRD wing (real)-from Pandagarage.com

T3 4-link

Battle version panhard bar

Walbro 255 lph fuel pump

Manual steering rack from SR5 AE86

4 spare tires

H&R 20mm Wheels spacers

thats the list of all the parts that I have at my house.

I also have various stickers and G-Force racing shoes

these next couple things are things that are parts that are ordered and I am waiting on.

Seibon carbon fiber hatch-$631 from carbonfiberhoods.net

AE111 20V 4AGE -$1500 from Pandagarage.com

T3 waterline relocation kit

Carbon Fiber hatch

2010-02-09T15:31:00.000-08:00

I ordered a Seibon Carbon Fiber Hatch today for $631 free shipping. It should be here in a couple weeks maybe a little less. I'm going to have a glass guy swap the glass from my stock hatch to the carbon fiber hatch for now, and eventually I will get lexan glass for it. So as soon as I get the hatch the car is ready for paint along with flaring the fenders.

After paint and body work and what not the Corolla is going into VIP for a coilover install and then its the waiting game again I would imagine. I am going to talk to Panda Garage in the next couple days to figure out where my engine stands. no pun intended.

Dyno Results

2010-02-05T21:45:00.000-08:00

This is my first (and only at this point) set of Dyno results

77.9 hp at 4950 rpm LAME
99.2 ft-lbs torque at 3950 rpm LAME

We are guessing that my timing is way off which is the only thing that can explain how stupid my Torque curve is. I did have a tensioner problem that may have caused my cam(s) to skip a tooth and they were saying my dizzy looks way off.. also possible. But this is what I have to start with and this will be much much better after winter time.

First Post

2010-02-05T21:27:00.000-08:00

Here is my "story" I guess. I got into drifting only about 3 years ago or so but I didn't have a license or know much about it at all. I'm not one of those guys that watched Initial D and was hooked. Actually I watched Formula D on G4TV when it was on that channel and that is what got me into drifting. I have been into cars my whole life mostly from my Dad and me going to car shows.

When I was only twelve my Mom passed away from cancer and I immediately became best friends with my Dad. We did everything together. We hung out more and although at that time I wasn't as into cars as I am now I think thats what really started to make them my main thing.

My Dad taught me to play drums when I was five years old and about a year before my mothers passing a few friends and I started a band. This was my main focus until about the middle of my sophomore year in High School and I decided to go to the Skills Center for the Automotive Technology Program. This made my love for cars resurface again and become my main focus. I am not in any of the bands I was in anymore and have complete focus on cars, drifting, and being competitive.

My first car was a 1991 Toyota Corolla sedan, and it was an automatic. This car, however slow it was, was amazingly reliable, and is what made the Corolla the car I would always want to have. I then searched to find a Corolla that would better suite higher performance driving, and of course the car that came up was the AE86. Ever sense I learned the very little I did that first time about the AE86 I was in love with them and in love with Toyota in general.

On February 15th, 2009 my Dad passed away which left me with no parents at the age of seventeen. I moved in with my brother and finished High School (barely). The money I got from my Dad passing is what is funding my need to be a competitive drifter. I think that if the situation was different and I got the money in a different way this would be what my Dad wanted me to do with the money.

Anyways thats my story about how I got into drifting and what has brought me to this build

So this is going to be the more available build log of what I am calling the Turquoise Turtle.